Replaced the Right Hand mirror on my 85 K100RS and these pictures show how the job is done.
First, this is what my mirror assembly looks like. It has a parting line around the edge. The turn signal indicator is held in place by a single screw.
I removed the turn signal lens and then was able to part the two halves by popping the parting line.
Then I put the new mirror in from the opposite side and installed the c-clip onto the groove in the replacement mirror ball as seen in the photo below.
Then I just snapped the two halves of the mirror assembly back together, screwed the turn signal indicator back into the housing and put the mirror back onto the 3 posts on the fairing. Simple as that
No comments:
Post a Comment